King Scooter
pesawat: :SOLD
mouse : SOLD
Heli Rescue 
Man with suitcase Senin, 03 Mei 2010
Motorbike 
kangoroo 
Harley 
Fire dept 
Rolls Royce 
Lucky toys Made in japan : soldmainan tin toys
This Blog dedicated for toys collector and who love tin toys.
Tin toy collecting has continued to be an exciting tradition though out history. Beginning as early as the 1800’s when many tinplate toys came from German companies. Some of those notable companies included Bing (1863), Fleischman (1887), Lehmann (1881), Gunthermann (1880) and Marklin (1859). These companies developed and set the high standards for the Germany tinplate industry. Later as the interest in tin toys continued, other Germany manufacturers such as Arnold (1906), Tipp & Company (1912), Schuco (1912) and Levy (1920) continued to carry on the tradition.
With the growing interested in tinplate toys. Other companies in Europe began to surface, the Rossignol factory in France and the British Chad Valley, a Company first established in 1823 trading under the name of "Chad" and later, in 1919, "Chad Valley Toys". The British companies continued to flourish after the First World War when the British public shunned all German products, including toys.
Some of the other reputable British manufacturers were Lines Brothers Limited (1919-1983), later known as Triang producing a range of fine wind up tin toys, prams and bicycles and wooden pull-along toys. Louis Marx, an American Company with a British subsidiary (1932-1961) produced a huge variety of unusual novelty items, including some tinplate toys. The Mettoy (Metal Toys) Company Limited (1933) flourished as it supplied toy lorries and aircraft to Marks & Spencer Stores. After the Second World War, the Company diversified into the first small plastic toys, leading on to Corgi's which went into production in 1956. Brimtoy (1914 1932) merged with Wells in 1932 to become Wells-Brimtoy Limited. Known for producing a vast selection of high-quality tinplate items, some of which are very unusual and highly collectable today, such as their clockwork fish (1954), flying Superman (1957), dancing Fairy Queen (1954), Mickey Mouse drawing tutor (1955) and walking pig and jumping kangaroo (1945).
The Japanese tin plate toys first appeared in the Meiji and Taisho era. Japan also had been a major producer tin toys for as long as the Europeans, but it was not until the late 1940's, 50's and 60's that production reached its height. The word tin plate in Japanese derived from Dutch (blic). Around 1874-1875, imported tin plate was mostly used for oilcans. However, increasing numbers of imported tin plate toys from Germany brought about Japan's entry into the tin plate toy business. At that time, while Germany provided state of art tin plate toys that include trains and boats, Japan crafted conventional tin plate toys such as rattles, Jinrikisha(a rick shaw), and kamenoko. initially, The tin toy business in Japan did not fair well until the Sino- Japanese war of 1894, when the business started picking up. With the introduction of printing machines for the tin plate, and the technology of clockwork from Germany, Japan's tin plate industry accelerated. Eventually Japan became the reputable tinplate tin toy producing center, leaving behind Germany in the aftermath of World War I.
Japan’s extensive list of tin toy companies is enormous. One of the many toy companies whose products have endured over time is the Marusan Co. LTD. with roots dating back to 1924 is still a major producer of toys. Another founded in 1923, Masudaya was a leading builder of mechanical and battery operated toys in the post war period, and unlike most of their competitors, has managed to survive to this day. Masudaya normally identifies their toys using the M-T, or Modern Toys logo. Nomura, also known at TN, was one of the biggest and most prolific of all post-war Japanese toy makers. Yoshiya (1950--1970) also known as Kobe Yoko Ltd. was a major Japanese toy maker from the post war period. Yoshiya known by their mark KO, specialised in mostly mechanical or wind-up toys featuring fanciful designs, but they are also known for its extensive line of Robby the Robot knockoff toys. Bandai (1950) was and is still a powerhouse in Japanese toy making; Bandai thrives to this day as Japan's largest and most successful toy maker. Masuo founded 1950's, also identified as Masuya, was a small Japanese toy maker best known for their mechanical and friction toys marked with an SM or MS logo type.
NK (Sankei) 1950's, SNK, also known as Sankei, was a small time Japanese toy maker. SNK is best known for their copy (in more than one variation) of Zoomer type robots, but they also manufactured toys of other varieties. Sanyo a little known Japanese toy maker that thrived during the 1950's and seemingly vanished thereafter. Primarily a builder of penny toys and other cheap playthings. Yonezawa founded 1950's, also known as Y, or Yone, Yonezawa was one of the biggest and certainly the most creative of all post war Japanese toy makers. Other Yonezawa toys are labelled under STS, possibly an importer. Yonezawa was a prodigious toy maker indeed, manufacturing thousands of different battery operated and mechanical toys in all categories from the early 1950's through the early 1970's. Horikawa (1959) one of the most successful of all post war Japanese toy makers, yet also one of the least respected by collectors. Horikawa specialized in robot/astronaut battery operated toys with great marketplace success. Naito Shoten toys are generally marked with the brands AN or AHI, and it is believed that they were a division of or worked closely with Nomura in the 1960’s. Noguchi founded 1960’s, an obscure Japanese toy maker that is also thought to have been a division of Nomura. Noguchi was also known as N, and they were best known for their limited line of paddle walking wind up robots and astronauts. Ohta (K) was a small, short lived Tokyo toy maker that created a small collection of playthings under their own brand, mainly during the late 1950's and early 1960's.
Japan continued to produce high quality tin toys until after the World War II. Producing a wide variety of tin cars, novelty toys, wind up toys, robots and celluloid animals. While the toys were mostly aimed for the American market, they where marked "Foreign" (rather than "Made in Japan") to ease international attitudes. In reference the Americans had a similar negative attitude towards Japanese products as the British had towards German goods.
One of the influential factors that helped Japan. Began in 1947 while under the American occupation of Japan, the tin plate toy industry was granted a right to resume its operation and export. In 1948, friction toys, shaped of trains, fire engine trucks and automobiles emerged. And around 1955, electronic toys took over them. Eight years later, 60% of the exported toys in Japan were made out of tin plate. However, this trend remained only until later half of 1960. The tin plate toys had gradually disappeared as plastic and super alloy toys emerged.
The United States also has a long history of tin toy manufactures dating back to 1850, when there were at least fifty toy makers in the United States. The bulk of this group operated in and around Connecticut, but a notable exception was Francis, Field, and Framis of Philadelphia. Also known as the Philadelphia Tin Toy Manufactory, this organization is the first toy manufacturer of record in America, and was making toys as a business at least as early as 1838. Other notable American companies of the period 1850 --1885 included the George W. Brown Company of Connecticut, James Fallows and Company of Philadelphia, Althof, Bergmann and Company of New York. Followed by the Ives Corporation in Bridgeport, Connecticut and the Leo Schlesinger Company of New York. Brooklyn's Buckman Manufacturing Co. produced its first early version of a steam-powered tin toy around 1872. A pre and post W.W.II tin toy manufacture Unique Art Mfg. Co. founded 1916, produced a wide range of entertaining mechanical tin toys and vehicles. The Strauss Company founded 1918 located in East Rutherford, New Jersey had a very interesting history in the tradition of tin toys. Ferdinand Strauss, from Alsace, France was a toy importer in the early 1900's. During the World War I embargo of German toys, Strauss began producing his own. Strauss also employed Louis Marx and continued to produce a variety of wind-up toys in the United States until 1942.
The United States is where mass produced tin toys began, opening the floodgates for an industry, which thrived well into late 1950’s. When reputable American companies such as Marx Toys 1940s, J. Chein and Co. founded in 1903, Wolverine U.S.A. and the Ohio Art Company carried on the tradition and produced many of the highly sought after tin toys found on the market today. An interesting fact is wind-up tin toys have a history of being inexpensive during certain periods of time. This was a fact for American ones made during the Great Depression of the 1930’s. A desperate time for many American people. Tin toys were a very inexpensive toy, which in return made them a popular gift of that period.
In addition to the American, German, European and Japanese toy maker’s Spain also had produced tin toys manufactured by the Paya Company. Founded 1902 Rafael Paya, the local tinsmith, made his first toy. Four years later Rafael's sons Pascual, Emilio, and Vincente built the first toy factory in Spain. By the 1920's Paya's toys were considered the equal of then great and famous toy makers to the north. Not only was Paya quality the equal of Marklin of Germany, but Paya's colors and imprints were graphically more interesting, precise, and bolder.
The 1930's, with Raimundo Paya at the helm, was the time of great expansion. This was when the famous Bugatti race car was made. After the war, in 1946, Paya once again started making toys. In 1985, Lino made the decision to remake all of the classic old litho tinplate toys on a very limited basis. The production of each was limited to 5,000 (or less) world-wide. Although with a long history in the tradition of tin toy making the Paya Company just recently shut down its operation.
The tradition of tin toy making also continues
Tin Toys The Tradition Lives On...
Tin toy collecting has continued to be an exciting tradition though out history. Beginning as early as the 1800’s when many tinplate toys came from German companies. Some of those notable companies included Bing (1863), Fleischman (1887), Lehmann (1881), Gunthermann (1880) and Marklin (1859). These companies developed and set the high standards for the Germany tinplate industry. Later as the interest in tin toys continued, other Germany manufacturers such as Arnold (1906), Tipp & Company (1912), Schuco (1912) and Levy (1920) continued to carry on the tradition.
With the growing interested in tinplate toys. Other companies in Europe began to surface, the Rossignol factory in France and the British Chad Valley, a Company first established in 1823 trading under the name of "Chad" and later, in 1919, "Chad Valley Toys". The British companies continued to flourish after the First World War when the British public shunned all German products, including toys.
Some of the other reputable British manufacturers were Lines Brothers Limited (1919-1983), later known as Triang producing a range of fine wind up tin toys, prams and bicycles and wooden pull-along toys. Louis Marx, an American Company with a British subsidiary (1932-1961) produced a huge variety of unusual novelty items, including some tinplate toys. The Mettoy (Metal Toys) Company Limited (1933) flourished as it supplied toy lorries and aircraft to Marks & Spencer Stores. After the Second World War, the Company diversified into the first small plastic toys, leading on to Corgi's which went into production in 1956. Brimtoy (1914 1932) merged with Wells in 1932 to become Wells-Brimtoy Limited. Known for producing a vast selection of high-quality tinplate items, some of which are very unusual and highly collectable today, such as their clockwork fish (1954), flying Superman (1957), dancing Fairy Queen (1954), Mickey Mouse drawing tutor (1955) and walking pig and jumping kangaroo (1945).
The Japanese tin plate toys first appeared in the Meiji and Taisho era. Japan also had been a major producer tin toys for as long as the Europeans, but it was not until the late 1940's, 50's and 60's that production reached its height. The word tin plate in Japanese derived from Dutch (blic). Around 1874-1875, imported tin plate was mostly used for oilcans. However, increasing numbers of imported tin plate toys from Germany brought about Japan's entry into the tin plate toy business. At that time, while Germany provided state of art tin plate toys that include trains and boats, Japan crafted conventional tin plate toys such as rattles, Jinrikisha(a rick shaw), and kamenoko. initially, The tin toy business in Japan did not fair well until the Sino- Japanese war of 1894, when the business started picking up. With the introduction of printing machines for the tin plate, and the technology of clockwork from Germany, Japan's tin plate industry accelerated. Eventually Japan became the reputable tinplate tin toy producing center, leaving behind Germany in the aftermath of World War I.
Japan’s extensive list of tin toy companies is enormous. One of the many toy companies whose products have endured over time is the Marusan Co. LTD. with roots dating back to 1924 is still a major producer of toys. Another founded in 1923, Masudaya was a leading builder of mechanical and battery operated toys in the post war period, and unlike most of their competitors, has managed to survive to this day. Masudaya normally identifies their toys using the M-T, or Modern Toys logo. Nomura, also known at TN, was one of the biggest and most prolific of all post-war Japanese toy makers. Yoshiya (1950--1970) also known as Kobe Yoko Ltd. was a major Japanese toy maker from the post war period. Yoshiya known by their mark KO, specialised in mostly mechanical or wind-up toys featuring fanciful designs, but they are also known for its extensive line of Robby the Robot knockoff toys. Bandai (1950) was and is still a powerhouse in Japanese toy making; Bandai thrives to this day as Japan's largest and most successful toy maker. Masuo founded 1950's, also identified as Masuya, was a small Japanese toy maker best known for their mechanical and friction toys marked with an SM or MS logo type.
NK (Sankei) 1950's, SNK, also known as Sankei, was a small time Japanese toy maker. SNK is best known for their copy (in more than one variation) of Zoomer type robots, but they also manufactured toys of other varieties. Sanyo a little known Japanese toy maker that thrived during the 1950's and seemingly vanished thereafter. Primarily a builder of penny toys and other cheap playthings. Yonezawa founded 1950's, also known as Y, or Yone, Yonezawa was one of the biggest and certainly the most creative of all post war Japanese toy makers. Other Yonezawa toys are labelled under STS, possibly an importer. Yonezawa was a prodigious toy maker indeed, manufacturing thousands of different battery operated and mechanical toys in all categories from the early 1950's through the early 1970's. Horikawa (1959) one of the most successful of all post war Japanese toy makers, yet also one of the least respected by collectors. Horikawa specialized in robot/astronaut battery operated toys with great marketplace success. Naito Shoten toys are generally marked with the brands AN or AHI, and it is believed that they were a division of or worked closely with Nomura in the 1960’s. Noguchi founded 1960’s, an obscure Japanese toy maker that is also thought to have been a division of Nomura. Noguchi was also known as N, and they were best known for their limited line of paddle walking wind up robots and astronauts. Ohta (K) was a small, short lived Tokyo toy maker that created a small collection of playthings under their own brand, mainly during the late 1950's and early 1960's.
Japan continued to produce high quality tin toys until after the World War II. Producing a wide variety of tin cars, novelty toys, wind up toys, robots and celluloid animals. While the toys were mostly aimed for the American market, they where marked "Foreign" (rather than "Made in Japan") to ease international attitudes. In reference the Americans had a similar negative attitude towards Japanese products as the British had towards German goods.
One of the influential factors that helped Japan. Began in 1947 while under the American occupation of Japan, the tin plate toy industry was granted a right to resume its operation and export. In 1948, friction toys, shaped of trains, fire engine trucks and automobiles emerged. And around 1955, electronic toys took over them. Eight years later, 60% of the exported toys in Japan were made out of tin plate. However, this trend remained only until later half of 1960. The tin plate toys had gradually disappeared as plastic and super alloy toys emerged.
The United States also has a long history of tin toy manufactures dating back to 1850, when there were at least fifty toy makers in the United States. The bulk of this group operated in and around Connecticut, but a notable exception was Francis, Field, and Framis of Philadelphia. Also known as the Philadelphia Tin Toy Manufactory, this organization is the first toy manufacturer of record in America, and was making toys as a business at least as early as 1838. Other notable American companies of the period 1850 --1885 included the George W. Brown Company of Connecticut, James Fallows and Company of Philadelphia, Althof, Bergmann and Company of New York. Followed by the Ives Corporation in Bridgeport, Connecticut and the Leo Schlesinger Company of New York. Brooklyn's Buckman Manufacturing Co. produced its first early version of a steam-powered tin toy around 1872. A pre and post W.W.II tin toy manufacture Unique Art Mfg. Co. founded 1916, produced a wide range of entertaining mechanical tin toys and vehicles. The Strauss Company founded 1918 located in East Rutherford, New Jersey had a very interesting history in the tradition of tin toys. Ferdinand Strauss, from Alsace, France was a toy importer in the early 1900's. During the World War I embargo of German toys, Strauss began producing his own. Strauss also employed Louis Marx and continued to produce a variety of wind-up toys in the United States until 1942.
The United States is where mass produced tin toys began, opening the floodgates for an industry, which thrived well into late 1950’s. When reputable American companies such as Marx Toys 1940s, J. Chein and Co. founded in 1903, Wolverine U.S.A. and the Ohio Art Company carried on the tradition and produced many of the highly sought after tin toys found on the market today. An interesting fact is wind-up tin toys have a history of being inexpensive during certain periods of time. This was a fact for American ones made during the Great Depression of the 1930’s. A desperate time for many American people. Tin toys were a very inexpensive toy, which in return made them a popular gift of that period.
In addition to the American, German, European and Japanese toy maker’s Spain also had produced tin toys manufactured by the Paya Company. Founded 1902 Rafael Paya, the local tinsmith, made his first toy. Four years later Rafael's sons Pascual, Emilio, and Vincente built the first toy factory in Spain. By the 1920's Paya's toys were considered the equal of then great and famous toy makers to the north. Not only was Paya quality the equal of Marklin of Germany, but Paya's colors and imprints were graphically more interesting, precise, and bolder.
The 1930's, with Raimundo Paya at the helm, was the time of great expansion. This was when the famous Bugatti race car was made. After the war, in 1946, Paya once again started making toys. In 1985, Lino made the decision to remake all of the classic old litho tinplate toys on a very limited basis. The production of each was limited to 5,000 (or less) world-wide. Although with a long history in the tradition of tin toy making the Paya Company just recently shut down its operation.
The tradition of tin toy making also continues
in India. Rattandeep Enterprises currently operates a plant were craftsmen dedicated to the old custom’s of making tin products by hand produce various styles of steam powered putt putt boats. Amazingly they have no electric or pneumatic powered presses or cutting machines. All of the lithograph work is done by hand as well; including assembly on hand operated arbour presses.
Since the Cultural Revolution period for China began in the 1970's. China has assumed the role of the leading tin toy maker in the world. The history of Chinese toys (not folk toys) started as early as 1908. The first celluloid toy factory and tin toy factory started around 1910. After the demise of the Japanese tin toy industry in the 1960’s China has grabbed the market. Often in the past Chinese toys were noted for their cheap prices, which negatively reflect in their quality. Nowadays with the continued demand for tin toys, China has elevated to a much higher quality standard, while retaining the edge of being very affordable. China produces a very wide range of reproduction tin toys with new ones being continually introduced to the market each year.
Some of the finest, most expensive and highly sought-after toys today are made from tin. The range is hugely diverse, covering pull-along, clockwork, wind up, battery-operated, friction cars, trains, planes, boats, animals - in fact the manufacturers were enormously enterprising in the variety of toys they made.
There has recently been resurgence in tin toy popularity. With the advent of the Internet, increased availability of both vintage and newly manufactured tin toys. Now is the time is the time to acquire and explore the fantastic history of tin toy making...
Let’s all hope this tradition lives on for generations to come..
Langganan:
Postingan (Atom)
Postingan
